ALEN1=0, SYTH=others, DVTH=others, W10S=0, ALEN0=0, CMOD=0, WINT=others
STCA Operating Mode Register
| WINT | Worst 10 Acquisition Time 0 (0x00): The worst 10 values are not acquired. 0 (others): Sync message reception: (WINT) time |
| CMOD | Time Synchronization Correction Mode 0 (0): Mode 1 1 (1): Mode 2 |
| W10S | Worst 10 Acquisition Control Select 0 (0): Measurement is started by hardware and the value acquired in the PW10VR or MW10R register is used as the limit for filtering. 1 (1): Measurement is started by the GETW10R.GW10 bit. Also, the value set in the PLIMITR or MLIMITR register is used as the limit for filtering. |
| SYTH | Synchronized State Detection Threshold Setting 0 (0x0): None 0 (others): (SYTH) time |
| DVTH | Synchronization Loss Detection Threshold Setting 0 (0x0): None 0 (others): (DVTH) time |
| ALEN0 | Alarm Detection Enable 0 0 (0): The STSR.SYNC or SYNCOUT flag is not set to 1 on detection of synchronization or loss of synchronization. 1 (1): The STSR.SYNC or SYNCOUT flag is set to 1 on detection of synchronization or loss of synchronization. |
| ALEN1 | Alarm Detection Enable 1 0 (0): The STSR.SYNTOUT flag is not set to 1 on detection of the Sync message reception timeout interrupt. 1 (1): The STSR.SYNTOUT flag is not set to 1 on detection of the Sync message reception timeout interrupt. |